Shree Shyam Corporation

Silicone Rubber Coated Fiberglass Fabric is manufactured by SSC Performance Materials by coating various levels of silicone emulsion on fiberglass fabrics of varied thicknesses. It does not contain asbestos or ceramic.

The features of a silicone fabric manufactured by SSC Performance Materials, are as follows:

• Silicone Fiberglass helps greatly in heat insulation.
• Even though Silicone Fiberglass has high strength, it is flexible and soft.
• The silicone coated fiberglass fabric is chemical, oil and water resistant.
• The fabric is resistant to oxygen, ozone and light.
• Silicone Fabric can be single or double sided coated.
• Maximum temperature resistance is 550°C with constant protection provided for up to 260°C.
• Available in shiny or matt finish.
• Regular colours include red, grey, black, Olive Green, And Orange.
• The thickness varies between 0.25 mm up to 3 mm.

Applications Include:
Electric insulation:

• The fabric has high grade of electric insulation and bear a load of high voltage.

Non-metallic compensator:

• Used as pipeline flexible coupling, nonmetallic compensator helps to avoid damage caused by heat expansion and cold contraction. This membrane material specially fit for use in industries like petroleum, chemical engineering, cement, iron and steel and energy sources due to its special features of temperatures resistance, anti-corrosion, anti-aging, and good elasticity and toughness.

Anti-corrosion sector:

• It is good to be used as inner and outer anti-corrosion layer featuring excellent corrosion resistance, temperatures and high strength. It proves to be an ideal anti-corrosion material.

Welding Blanket:

• These fabrics offer high-temperature and heat resistance, along with the ability to shed welding splatter and molten steel & aluminium splash. Typical applications are as welding curtains or blankets, or hightemperature protection blankets for engine exhaust components or industrial equipment, steam and gas turbines.

Other:

• Apart from above application, it can also be used as sealing material, temperature resistance and anticorrosion conveyor belt and packaging material. Silicone coated fabrics are the perfect choice for protecting a variety of hoses, lines, wires, cables and equipment assemblies such as electronic enclosures, valves, robotic heads, festoon cables, EAF cables, etc, from exposure to high temperature, molten metal splash, slag, welding splatter, UV light, abrasion and contamination.

Premium Grade PTFE Coated Fiberglass Fabric have extremely smooth surface without any surface defect. Premium Grade has an extra Add on of PTFE on the glass fabric that makes it more durable and smooth finish. High quality glass fabrics combined with specially formulated high level of PTFE content produces super smooth, high gloss surface coating. It has also good abrasion resistance and tensile strength. Applications may include laminate – release sheets, belting for food, electrical insulation and industrial processing. The product can be used in direct contact with food.

Properties:

• High release from sticky materials 'Non- stick' smooth surface
• Operating temperature range -73 Deg C to +260 Deg C
• Excellent chemical resistance
• High electrical insulative and dielectric properties
• Dimensional stabilities under heat and pressure
• Low electrical losses
• Mildew and fungus resistance
• Ultra-Violet, infra-Red, Micro-wave, radio frequency resistance

Applications:

• Abrasive: During the manufacturer of Grinding Wheels our PTFE or Glass Fabrics are used as a separator in place of traditional Aluminium plate. On account of Non-stick surface, less thickness and weight, more number of disc are able to cure at a time. Cost of PTFE or Glass fabric is very nominal when compare with Aluminium sheet.
• Aerospace: Designed to be ‘Breathable’ without sacrificing the non-stick properties of PTFE , our porous grade allows products to cure and outgas through the fabric. Porous bleeder material used as release fabric in vacuum molding.
• Conveyor Belts: PTFE or Glass Fabric is engineered to make conveyor belts for various application in Food, Textiles & Garments, UV & IR Curing systems, Extrusion, Packaging, Chemical and many more applications are being developed day by day.
• Food Processing: PTFE or Glass Fabric belts are used for transporting Quick Frozen Foods through freezing chambers and bakery items i.e. biscuits, Confectionery items, Tortilla Industry, Drying Fruits, Tray for Baking products etc.
• Packaging: It is used for Heat Sealing applications like LDPE pouches, all kinds of dairy products. PE bags, Stationary and books packaging through shrink tunnels. Conveyor Belts on Acma – Wrap machines for detergent and soap cake packing. PTFE or 2ply Glass Fabric belts are used in continuous sealers. 
• Photovoltaic/Solar: High gloss and very smooth surface PTFE Coated glass fabrics up to 2500 mm wide,This can be used as belting material during solar module lamination process. PTFE Fabrics used as released products (sheets & belts) in the vacuum lamination process of rigid or flexible photovoltaic modules.

Anti-Static PTFE Coated Fiberglass Fabric is a composition of two advanced materials having remarkable properties. PTFE has outstanding properties like highly flexible, chemically inert, Thermally & Electrically Resistant & Non - stick having a melting point of 327 Degree C. PTFE is insoluble in all common solvent, It is stable enough to beused in between -73 Degree C to +260 Degree C without degrading.PTFE itself is a highly versatile product withwell know remarkable properties and fiberglass is well known as an excellent material in terms of its high temperature resistance and dimensionally stability. Combination of these two materials gives one product of practically unsurpassed utility and value with following properties:

• High release from sticky materials Non- stick smooth surface
• Operating temperature range -73 Deg C to +260 Deg C
• Excellent chemical resistance
• High electrical insulative and dielectric properties
• Dimensional stabilities under heat and pressure
• Low electrical losses
• Mildew and fungus resistance
• Ultra-Violet, infra-Red, Micro-wave, radio frequency resistance

Anti - Static Grade Fabrics: To dissipate static charges developed duringprocessing of dry products, glass fabric is coated by mixing Anti-static chemical with PTFE to make Antistatic Grade PTFE coated fiberglass fabric.

Applications:

• Abrasive: During the manufacturer of Grinding Wheels our PTFE or Glass Fabrics are used as a separator in place of traditional Aluminium plate. On account of Non-stick surface, less thickness and weight, more number of disc are able to cure at a time. Cost of PTFE or Glass fabric is very nominal when compare with Aluminium sheet.
• Aerospace: Designed to be Breathable without sacrificing the non-stick properties of PTFE , our porous grade allows products to cure and outgas through the fabric. Porous bleeder material used as release fabric in vacuum molding.
• Conveyor Belts: PTFE or Glass Fabric is engineered to make conveyor belts for various application in Food, Textiles & Garments, UV & IR Curing systems, Extrusion, Packaging, Chemical and many more applications are being developed day by day.
• Food Processing: PTFE or Glass Fabric belts are used for transporting Quick Frozen Foods through freezing chambers and bakery items i.e. biscuits, Confectionery items, Tortilla Industry, Drying Fruits, Tray for Baking products etc.
• Packaging: It is used for Heat Sealing applications like LDPE pouches, all kinds of dairy products. PE bags, Stationary and books packaging through shrink tunnels. Conveyor Belts on Acma - Wrap machines for detergent and soap cake packing. PTFE or 2ply Glass Fabric belts are used in continuous sealers. 
• Photovoltaic/Solar: High gloss and very smooth surface PTFE Coated glass fabrics up to 2500 mm wide,This can be used as belting material during solar module lamination process. PTFE Fabrics used as released products (sheets & belts) in the vacuum lamination process of rigid or flexible photovoltaic modules.

With the advent of more & more industrialization, new technology is evolved to protect/shield human beings & surrounding atmosphere from extreme condition. Lot of new products in Fiber Glass Fabrics & Coating on fabrics are developed for Thermal insulation and Flame retardant which are environment friendly and non- toxic.  These products are designed to provide a complete one stop solution for all high Temperature Thermal & Acoustic Insulation Applications. Each of these products have different temperature resistance and properties, making each of them a very unique product suitable for a niche application. 
This is a high temperature, heat and flame resistant thermal insulating fiberglass (fibreglass or glassfibre) fabric fabricated from high quality type E fiberglass that will not burn and will withstand continuous exposure to temperatures of 1000F / 520C.  It is used to protect equipment, wires, cables, hoses, tubing and pipes.  This high temperature fabric provides thermal insulation and personnel protection.
These high temperature fabrics are often used to fabricate insulated equipment covers, welding curtains and blankets.
This material resists most acids and alkalis and is unaffected by most bleaches and solvents.  It is highly flexible and conformable.

Available in the following finishes:

• Plain
• Heat Treated
• Vermiculite Coated
• PTFE (teflon) Coated
• Aluminum Foil Coated one side
• PSA (Pressure Sensitive Adhesive)

We are a unique entity in the industry, actively committed towards offering an optimum quality range of Black PTFE Coated Fiberglass Fabric.

Properties:

• High release from sticky materials 'Non- stick' smooth surface
• Operating temperature range -73 Deg C to +260 Deg C
• Excellent chemical resistance
• High electrical insulative and dielectric properties
• Dimensional stabilities under heat and pressure
• Low electrical losses
• Mildew and fungus resistance
• Ultra-Violet, infra-Red, Micro-wave, radio frequency resistance

Applications:

• Abrasive: During the manufacturer of Grinding Wheels our PTFE or Glass Fabrics are used as a separator in place of traditional Aluminium plate. On account of Non-stick surface, less thickness and weight, more number of disc are able to cure at a time. Cost of PTFE or Glass fabric is very nominal when compare with Aluminium sheet.
• Aerospace: Designed to be ‘Breathable’ without sacrificing the non-stick properties of PTFE , our porous grade allows products to cure and outgas through the fabric. Porous bleeder material used as release fabric in vacuum molding.
• Conveyor Belts: PTFE or Glass Fabric is engineered to make conveyor belts for various application in Food, Textiles & Garments, UV & IR Curing systems, Extrusion, Packaging, Chemical and many more applications are being developed day by day.
• Food Processing: PTFE or Glass Fabric belts are used for transporting Quick Frozen Foods through freezing chambers and bakery items i.e. biscuits, Confectionery items, Tortilla Industry, Drying Fruits, Tray for Baking products etc.
• Packaging: It is used for Heat Sealing applications like LDPE pouches, all kinds of dairy products. PE bags, Stationary and books packaging through shrink tunnels. Conveyor Belts on Acma – Wrap machines for detergent and soap cake packing. PTFE or 2ply Glass Fabric belts are used in continuous sealers. 
• Photovoltaic/Solar: High gloss and very smooth surface PTFE Coated glass fabrics up to 2500 mm wide,This can be used as belting material during solar module lamination process. PTFE Fabrics used as released products (sheets & belts) in the vacuum lamination process of rigid or flexible photovoltaic modules.

PTFE Coated Fiberglass Fabric with standard formulation and percentage of PTFE content, provides a cost effective alternative to Premium grade series used for variety of industries and general purpose application, still maintaining good heat transfer, release property & flexibility.

Properties:

• High release from sticky materials 'Non- stick' smooth surface
• Operating temperature range -73 Deg C to +260 Deg C
• Excellent chemical resistance
• High electrical insulative and dielectric properties
• Dimensional stabilities under heat and pressure
• Low electrical losses
• Mildew and fungus resistance
• Ultra-Violet, infra-Red, Micro-wave, radio frequency resistance

Applications:

• Abrasive: During the manufacturer of Grinding Wheels our PTFE or Glass Fabrics are used as a separator in place of traditional Aluminium plate. On account of Non-stick surface, less thickness and weight, more number of disc are able to cure at a time. Cost of PTFE or Glass fabric is very nominal when compare with Aluminium sheet.
• Aerospace: Designed to be ‘Breathable’ without sacrificing the non-stick properties of PTFE , our porous grade allows products to cure and outgas through the fabric. Porous bleeder material used as release fabric in vacuum molding.
• Conveyor Belts: PTFE or Glass Fabric is engineered to make conveyor belts for various application in Food, Textiles & Garments, UV & IR Curing systems, Extrusion, Packaging, Chemical and many more applications are being developed day by day.
• Food Processing: PTFE or Glass Fabric belts are used for transporting Quick Frozen Foods through freezing chambers and bakery items i.e. biscuits, Confectionery items, Tortilla Industry, Drying Fruits, Tray for Baking products etc.
• Packaging: It is used for Heat Sealing applications like LDPE pouches, all kinds of dairy products. PE bags, Stationary and books packaging through shrink tunnels. Conveyor Belts on Acma – Wrap machines for detergent and soap cake packing. PTFE or 2ply Glass Fabric belts are used in continuous sealers. 
• Photovoltaic/Solar: High gloss and very smooth surface PTFE Coated glass fabrics up to 2500 mm wide,This can be used as belting material during solar module lamination process. PTFE Fabrics used as released products (sheets & belts) in the vacuum lamination process of rigid or flexible photovoltaic modules.

Owing to modern machines and high-grade raw materials, this PTFE Coated Fiberglass Tape provided by us is quite tolerant towards heat and pressure. Thus it is one of the best solutions to several industrial problems. Offered to clients in various specifications and at a market leading price, this offered tape is highly demanded. 

Features:

• Durable
• Dimensional stability under heat and pressure
• Excellent chemical resistance

Fiberglass Fabric made out of High Quality E-glass Fiberglass Yarn. Fiberglass Fabric is lightweight, versatile, and cost-effective. Fiberglass Fabric is used in a variety ofindustrial and commercial products. Because it’s made from glass, it is naturally resistant to heat, fire, chemicals, etc.

Properties:

• High Tensile Strength
• High heat resistance
• High Dimensional Stability
• Fire resistance
• Good thermal conductivity
• Good chemical resistance
• Outstanding electrical properties
• Durability
• Insulation
• Environment friendly
• Sound insulation
• Good filtration performance
• Used as the bindings of boiler for electrical machinery and appliances.

Applications:

• Backing material for Electrical Insulating Tapes.
• Aircraft, Boats, Automobiles
• Thermal Insulation.
• Reinforcement material for Polyester resins and Phenolic resins.
• Aluminium Filtration.
• Reinforcement for water proofing.
• Sound and heat protection
• PCB Board for computer
• Basic cloth for coatings and laminations
• Welding Blanket And Fire Blanket
• Expansion Joints
• Heat Shields and Containment
• Oven Door Seals
• Gasketing

PTFE Coated 3 Mil Non Porous Release paper.

• High release from sticky materials Non- stick smooth surface
• Operating temperature range -73 Deg C to +260 Deg C
• Excellent chemical resistance
• High electrical insulative and dielectric properties
• Dimensional stabilities under heat and pressure
• Low electrical losses
• Mildew and fungus resistance
• Ultra-Violet, infra-Red, Micro-wave, radio frequency resistance

PTFE Coated Fiberglass Fabric with standard formulation and percentage of PTFE content, provides a cost effective alternative to Premium grade series used for variety of industries and general purpose application, still maintaining good heat transfer, release property & flexibility.

Properties:

• High release from sticky materials 'Non- stick' smooth surface
• Operating temperature range -73 Deg C to +260 Deg C
• Excellent chemical resistance
• High electrical insulative and dielectric properties
• Dimensional stabilities under heat and pressure
• Low electrical losses
• Mildew and fungus resistance
• Ultra-Violet, infra-Red, Micro-wave, radio frequency resistance

Applications:

• Abrasive: During the manufacturer of Grinding Wheels our PTFE or Glass Fabrics are used as a separator in place of traditional Aluminium plate. On account of Non-stick surface, less thickness and weight, more number of disc are able to cure at a time. Cost of PTFE or Glass fabric is very nominal when compare with Aluminium sheet.
• Aerospace: Designed to be ‘Breathable’ without sacrificing the non-stick properties of PTFE , our porous grade allows products to cure and outgas through the fabric. Porous bleeder material used as release fabric in vacuum molding.
• Conveyor Belts: PTFE or Glass Fabric is engineered to make conveyor belts for various application in Food, Textiles & Garments, UV & IR Curing systems, Extrusion, Packaging, Chemical and many more applications are being developed day by day.
• Food Processing: PTFE or Glass Fabric belts are used for transporting Quick Frozen Foods through freezing chambers and bakery items i.e. biscuits, Confectionery items, Tortilla Industry, Drying Fruits, Tray for Baking products etc.
• Packaging: It is used for Heat Sealing applications like LDPE pouches, all kinds of dairy products. PE bags, Stationary and books packaging through shrink tunnels. Conveyor Belts on Acma – Wrap machines for detergent and soap cake packing. PTFE or 2ply Glass Fabric belts are used in continuous sealers. 
• Photovoltaic/Solar: High gloss and very smooth surface PTFE Coated glass fabrics up to 2500 mm wide,This can be used as belting material during solar module lamination process. PTFE Fabrics used as released products (sheets & belts) in the vacuum lamination process of rigid or flexible photovoltaic modules.

Fiberglass Fabric made out of High Quality E-glass Fiberglass Yarn. Fiberglass Fabric is lightweight, versatile, and cost-effective. Fiberglass Fabric is used in a variety ofindustrial and commercial products. Because it’s made from glass, it is naturally resistant to heat, fire, chemicals, etc.

Properties:

• High Tensile Strength
• High heat resistance
• High Dimensional Stability
• Fire resistance
• Good thermal conductivity
• Good chemical resistance
• Outstanding electrical properties
• Durability
• Insulation
• Environment friendly
• Sound insulation
• Good filtration performance
• Used as the bindings of boiler for electrical machinery and appliances.

Applications:

• Backing material for Electrical Insulating Tapes.
• Aircraft, Boats, Automobiles
• Thermal Insulation.
• Reinforcement material for Polyester resins and Phenolic resins.
• Aluminium Filtration.
• Reinforcement for water proofing.
• Sound and heat protection
• PCB Board for computer
• Basic cloth for coatings and laminations
• Welding Blanket And Fire Blanket
• Expansion Joints
• Heat Shields and Containment
• Oven Door Seals
• Gasketing

Backed by huge industry experience and market understanding, we are involved in offering a wide array of Acrylic Coated Fiberglass Fabric for our valued patrons. These acrylic coated products are made from fiberglass base cloth and impregnated or coated a side or both sides with compounded acrylic. All our products are acclaimed in the market for their excellent strength, high temperature insulation ozone, good resistance to abrasion & cuts and fireproof nature.

Applications:

• Welding protection, covering fabric.
• Serve as a welding defender, heat protection quilt, foundry splash protection.
• Heat protection cushions, motor vehicle industry, protection for piping outside.
• Used for aerospace, marine, chemical industry, power plant, auto-manufacture, construction, piping flexibility and sealing industry.

 

Technical Details:

 

Fiberglass Fabric made out of High Quality E-glass Fiberglass Yarn. Fiberglass Fabric is lightweight, versatile, and cost-effective. Fiberglass Fabric is used in a variety ofindustrial and commercial products. Because it’s made from glass, it is naturally resistant to heat, fire, chemicals, etc.

Properties:

• High Tensile Strength
• High heat resistance
• High Dimensional Stability
• Fire resistance
• Good thermal conductivity
• Good chemical resistance
• Outstanding electrical properties
• Durability
• Insulation
• Environment friendly
• Sound insulation
• Good filtration performance
• Used as the bindings of boiler for electrical machinery and appliances.

Applications:

• Backing material for Electrical Insulating Tapes.
• Aircraft, Boats, Automobiles
• Thermal Insulation.
• Reinforcement material for Polyester resins and Phenolic resins.
• Aluminium Filtration.
• Reinforcement for water proofing.
• Sound and heat protection
• PCB Board for computer
• Basic cloth for coatings and laminations
• Welding Blanket And Fire Blanket
• Expansion Joints
• Heat Shields and Containment
• Oven Door Seals
• Gasketing

Fiberglass Fabric made out of High Quality E-glass Fiberglass Yarn. Fiberglass Fabric is lightweight, versatile, and cost-effective. Fiberglass Fabric is used in a variety ofindustrial and commercial products. Because it’s made from glass, it is naturally resistant to heat, fire, chemicals, etc.

Properties:

• High Tensile Strength
• High heat resistance
• High Dimensional Stability
• Fire resistance
• Good thermal conductivity
• Good chemical resistance
• Outstanding electrical properties
• Durability
• Insulation
• Environment friendly
• Sound insulation
• Good filtration performance
• Used as the bindings of boiler for electrical machinery and appliances.

Applications:

• Backing material for Electrical Insulating Tapes.
• Aircraft, Boats, Automobiles
• Thermal Insulation.
• Reinforcement material for Polyester resins and Phenolic resins.
• Aluminium Filtration.
• Reinforcement for water proofing.
• Sound and heat protection
• PCB Board for computer
• Basic cloth for coatings and laminations
• Welding Blanket And Fire Blanket
• Expansion Joints
• Heat Shields and Containment
• Oven Door Seals
• Gasketing

Fiberglass Fabric made out of High Quality E-glass Fiberglass Yarn. Fiberglass Fabric is lightweight, versatile, and cost-effective. Fiberglass Fabric is used in a variety ofindustrial and commercial products. Because it’s made from glass, it is naturally resistant to heat, fire, chemicals, etc.

Properties:

• High Tensile Strength
• High heat resistance
• High Dimensional Stability
• Fire resistance
• Good thermal conductivity
• Good chemical resistance
• Outstanding electrical properties
• Durability
• Insulation
• Environment friendly
• Sound insulation
• Good filtration performance
• Used as the bindings of boiler for electrical machinery and appliances.

Applications:

• Backing material for Electrical Insulating Tapes.
• Aircraft, Boats, Automobiles
• Thermal Insulation.
• Reinforcement material for Polyester resins and Phenolic resins.
• Aluminium Filtration.
• Reinforcement for water proofing.
• Sound and heat protection
• PCB Board for computer
• Basic cloth for coatings and laminations
• Welding Blanket And Fire Blanket
• Expansion Joints
• Heat Shields and Containment
• Oven Door Seals
• Gasketing

Fiberglass Fabric made out of High Quality E-glass Fiberglass Yarn. Fiberglass Fabric is lightweight, versatile, and cost-effective. Fiberglass Fabric is used in a variety ofindustrial and commercial products. Because it’s made from glass, it is naturally resistant to heat, fire, chemicals, etc.

Properties:

• High Tensile Strength
• High heat resistance
• High Dimensional Stability
• Fire resistance
• Good thermal conductivity
• Good chemical resistance
• Outstanding electrical properties
• Durability
• Insulation
• Environment friendly
• Sound insulation
• Good filtration performance
• Used as the bindings of boiler for electrical machinery and appliances.

Applications:

• Backing material for Electrical Insulating Tapes.
• Aircraft, Boats, Automobiles
• Thermal Insulation.
• Reinforcement material for Polyester resins and Phenolic resins.
• Aluminium Filtration.
• Reinforcement for water proofing.
• Sound and heat protection
• PCB Board for computer
• Basic cloth for coatings and laminations
• Welding Blanket And Fire Blanket
• Expansion Joints
• Heat Shields and Containment
• Oven Door Seals
• Gasketing

PTFE coated fiberglass thread is made from continuous fiberglass filaments that are heat resistant, chemical resistant, and strong. The fiberglass is also coated with a PTFE, a.k.a Teflon (tm) finish to improve sewability, and reduce friction. It can withstand operating temperatures to around 1022 F (550 C). It is important to note the PTFE coating burns away at 620 F (320 C). This means the coating will propagate flame, but the fiberglass will have a greater heat resistance.

PTFE coated fiberglass thread is made from continuous fiberglass filaments that are heat resistant, chemical resistant, and strong. The fiberglass is also coated with a PTFE, a.k.a Teflon (tm) finish to improve sewability, and reduce friction. It can withstand operating temperatures to around 1022 F (550 C). It is important to note the PTFE coating burns away at 620 F (320 C). This means the coating will propagate flame, but the fiberglass will have a greater heat resistance.

We are leading manufacturer of premium grade Coated fiberglass fabrics.

We are doing different kind of coating on fiber glass as per customer requirement.

We are offering Aluminium Coated Fiberglass Fabric, With the use of retardant adhesive, the fiberglass fabric forms a highly dense composite film. It comes with light reflectivity and has relatively large longitudinal and transverse tensile. The fabric is waterproof and has a pretty smooth surface. Our aluminized fabric is made with an aluminized PES film laminated onto E-Glass Fiberglass fabric. The Aluminized film not only gives the fabric radiant heat reflectivity and flame resistance but also makes the fabric impervious to chemicals and water. This makes our aluminized fabric an excellent option for application in products used for thermal insulation and as a radiant barrier. The aluminized fiberglass cloth becomes an ideal pick, especially for safety clothing where flexibility is essential. 

Features:

• Light reflectivity
• Waterproof
• Transverse tensile
• Smooth surface

Applications:

• Air conditioning
• Heat Reflection Fabric for Automotive industry
• Ducting
• Insulation Mats
• Furnace wraping
• HVAC equipments
• Pipe insulation and building materials
• Oil pipes, steam pipes
• Fire Proximity Suits
• Furnace Safety Suits
• Aprons
• Gloves
• Radiant Heat blankets, welding blankets and curtains
• Expansion Joints and Bellows
• High temperature insulation
• Heat shield and containment
• Removable insulation cover
• Safety clothing
• Pipe wrapping
• Turbine blankets
• Engine exhaust covers and insulation blankets

We are offering Aluminum Coated Fiberglass Fabric With the use of retardant adhesive, the fiberglass fabric forms a highly dense composite film. It comes with light reflectivity and has relatively large longitudinal and transverse tensile. The fabric is waterproof and has a pretty smooth surface.

Features:

Light reflectivity

Waterproof

Transverse tensile

Smooth surface

Applications:

Air conditioning

HVAC equipments

Pipe insulation and building materials

Oil pipes, steam pipes

Separation of solid particles from gases by a textile filter media at a very high temperature is as essential part of an industrial process, contribute to the recovery of precious material & improvement in pollution control. In a fabric dust collector, dust laden gas is drawn through air permeable fabric, normally in the form of a tubular bag of different diameter & length where the gas passes through the fabric & the particles are retained. In this process the gas is filtered & clean gas comes out of dust collector/bag filter.
Our Woven Glass fiber filter media is designed with specific properties like yarn quality & count , Yarn density, Weave pattern to achieve required parameter for optimum efficiency in filtration at a temperature of 260 Degree C on continuous rating.
Special chemical finishes are imparted to withstand severe chemical attack, Mechanical stress & abrasion in extreme condition.

Types of Finishes:
Finish Code: SGT Silicone, Graphite, PTFE Finish

• A proportionate mixture of Silicone; Graphite; PTFE which protects media against abrasion, while it provides limited protection against chemical attack. This Finish is recommended for Cement & Foundry Industries.

Finish Code: PTFE Finish

• A ten percent add on of PTFE on the filter media, protects it from abrasion because PTFE encapsulates the glass filament. Recommended for utility based load boilers.

Finish Code: AR: Acid Resistant Finish

• This is formulated of a mixture of Silicone, Graphite, PTFE & an acid resistant polymer. This prevents Filter media against severe acid & chemical attacks while also reducing abrasion. Recommended for Industrial Boiler & Carbon Black.

Vermiculite Coated Fiberglass Fabric is woven from highly texturized continuous filament fiberglass yarn and treated with a proprietary vermiculite coating. The high temperature coating causes heat to disperse evenly across the surface of the fiberglass fabric, significantly boosting its resistance to high temperatures and abrasion. SSC proprietary vermiculite coating has larger platelets and agreater percentage of solids than competitive coatings allowing for better coverage and superior heat dispersion. Our coating also features an organic adhesion promoter to improve the bond between the platelets and the fiberglass fabric to reduce flaking, improve moisture resistance, and ensure a longer product life.

Applications:

• High Temperature Gloves
• Proscenium Curtains
• Insulation Blankets
• Welding Blankets and Welding Pads
• High Temperature Lagging